Better late than never...right??? It is a well know fact that I loathed our yellow bathtub, shower and counter tops. They were seriously the bane of my existence. However, our tight budget on the bathroom renovations did not allow for us to replace them. So, we got crafty, did some research and found the
Rust-Oleum 1 Qt. White Tub and Tile Refinishing Kit. These kits allow you to refinish the bathroom surfaces with a durable, high gloss epoxy acrylic paint. We watched tons of
Youtube how-to videos and read about a thousand reviews before we pulled the trigger and purchased the kits from Home Depot. They are not currently available in store, so you can check them out
HERE. We are trying to take care of both bathrooms at the same time (crazy, I know). We ended up purchasing four kits, which have taken care of a bathtub, shower stall, and 2 counter tops. We were able to take care of 2 coats on all surfaces. I would have liked to do a third coat for good measure, but we needed a functioning bathroom ASAP. So, if needed, we can always go back and add that last coat.
Here is the process that worked for us:
Step 1: Clean, Clean, Clean! We used a hefty dose of Comet to get a really good clean on all of the surfaces.
Step 2: Give the surfaces a good sanding with a fine grit sand paper. According to Kevin, this was his least favorite part, but it makes a BIG difference in the end result.
Step 3: Pull out the painters tape and tape off all of the surfaces. If this product gets on your walls or cabinets, it's not coming off any time soon. Be sure to secure the tape, and you should be good to go.
Step 4: Mix the materials as instructed on the box. FYI - the smell is pretty intense. We are fortunate and have an attic fan. We did this on a nice, warmer day, so we were able to turn it on and cut back on the fumes. If you have children, you may want to get them out of the house for the day, open the windows and wear a surgical mask. Seriously...it's tough to take in. The smell doesn't stick around for too long, though.
Step 5: Start painting the first coat. We used a foam roller and foam brushes for a more even finish. I was a little wary after we finished the first coat. I seemed a little spotty, and like the coverage wasn't going to be great or even. The first coat dries super quick, so you do not have to wait a long time to start on the second coat...maybe 1 to 2 hours.
Step 6: It's time for the second coat of paint. This will make all the difference in the world! Once the second coat goes on, you will forget about the crazy color of your old tub or tile or counter top. It's like magic!
Step 7: We let this paint dry overnight...just to make sure.
Step 8: Remove the painters tape. Kevin used an x-acto knife to do this. We wanted the edges to be sharp, so we didn't just rip it off the walls, like we tend to do with regular wall paint. It was a tedious and careful task, but the edges turned out perfectly!
Here are the after photos of the bathtub and counter top:
REVIEW: The Rust-Oleum Tub and Tile Refinishing Kit was awesome! The price is great and we are very pleased with the results. Are the surfaces 100% perfect? No, there are a few spots where bubbles dried in the paint. But, those are few and far between. Honestly, I don't think you could notice, unless you did a detailed inspection. I will do an update in a few months to let y'all know how it is holding up. Fingers crossed!!!
COST: $103.88 (4 units @ $25.97 each + free shipping)